The innovative design features four underhead serrations for enhanced grip, a hybrid drive for optimal torque and speed, an X-type bit for secure fitting, and a Stickfit head for one-handed, efficient installation. These elements work together to reduce loosening, stripping, and improve overall performance.
|
Reference Number
|
Thread Diameter
|
Length
|
Head Diameter
|
Head Height
|
Head Type
|
TPI
|
Screw Material
|
|---|---|---|---|---|---|---|---|
|
XFW10GB19SDC2
|
4.8mm/10g/3/16"
|
19
|
9.5
|
2
|
X-Framer Wafer head
|
16
|
SAE 1022 Carbon Steel
|
1.Precision Recess: The X-Framer™ features a precision recess that ensures consistent and reliable performance, minimizing the risk of wobbling or stripping out.
2.Under-Head Serrations: These serrations slow the rotation of the head, reducing the possibility of strip-out. They also apply pressure under the head to prevent vibrational loosening during transportation.
3.Secure Locking: The under-head serrations provide a tight lock in metal-to-metal applications.
4.ScreworksGuard™ Coating: Our exterior-grade coating offers enhanced protection against corrosion, making it suitable for various outdoor applications.
5.Low Profile Flat Head: This design sits flush with the steel frame edge, creating a smooth, flat surface for easy and accurate installation of cladding and lining.
6.Increased Stability and Torque: The X-Framer™ recess enhances stability and torque, making it easier to drive screws, which reduces worker fatigue and boosts productivity.
7.Effortless Penetration: The drill point is specifically designed for easy penetration into heavier gauge steel, facilitating quick and efficient assembly.
1.Four Underhead Serrations: These serrations enhance grip and stability, reducing the risk of loosening over time.
2.Hybrid Drive Design: Combines the best attributes of both the Phillips and square drives, there by providing a higher torque that is similar to square head and speed of a Phillips head.
3.X-Type Bit: This design allows for higher torque during installation, ensuring a secure fit and reducing the risk of stripping.
4.Stickfit Head: The unique stickfit head design ensures that once the fastener is inserted into the impact driver bit, it stays securely in place, allowing for one-handed drilling. This feature enhances convenience and efficiency during installation.
1.Pre-Drilling: Ensure that pre-holes are well aligned before driving the screws to maintain accuracy and stability.
2.Tool Selection: Use high-quality screw guns or impact drivers. For optimal performance, the recommended specifications are a minimum of 4 amps and an RPM range of 0 to 2,500.
Note: When using impact drivers, take care not to overdrive screws during the seating stage, as this can lead to fastener thread or head failure, or strip out the work surface.
3.Proper Seating: The screw head should be fully seated when it is flush with the work surface to ensure a secure connection.
4.Penetration Depth: The fastener should penetrate beyond the metal by a minimum of three thread pitches for a strong and reliable hold.
By adhering to these guidelines, you can ensure effective installation and optimal performance of Screworks fasteners.
1.Prefabrication: Ideal for light gauge steel assembly of steel frame walls and trusses.
2.Sharp Point: Specifically designed for pre-punched BMT steel ranging from 0.75 to 0.95 mm (20-22 gauge).
3.Drill Point: Suitable for both pre-punched and non-punched BMT steel, accommodating thicknesses from 0.95 to 1.55 mm.
4.Other metal to metal connections with max. steel thickness of 4.5mm
ScreworksTM products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. ScreworksTM and all other trademarks are registered trademarks of Stratus Steel Pvt. Ltd.
Ground Godown No.8, Omkar
Warehousing, Phursungi, Pune,
Maharashtra, 412308
Copyright © 2025 Screworks™ Stratus Steel Pvt. Ltd.
