A fully certified, low-profile drill screw with enhanced support for Screworks™ systems, designed for drilling into steel without pre-punched holes.
|
Reference Number
|
Thread Diameter
|
Length
|
Head Diameter
|
Head Height
|
Head Type
|
TPI
|
Screw Material
|
|---|---|---|---|---|---|---|---|
|
F10GB19SDC3
|
4.8mm/10g/3/16"
|
19
|
10
|
1.2
|
Flat Head
|
16
|
SAE 1022 Carbon Steel
|
1.Certified Compatibility: Fully tested and certified for use with the ScreworksTM System, ensuring the necessary connection strengths for calculated load requirements.
2.Low Profile Head: The 1mm thick head offers a flush bearing surface for lining substrates.
3.Drill Point (DP): Designed for drilling into medium to heavy gauge steel, eliminating the need for pre-punched holes.
4.Enhanced Support: Works in conjunction with Connectors to provide additional structural support and strength.
1.Pre-Drilling: Ensure that pre-holes are well aligned before driving the screws to maintain accuracy and stability.
2.Tool Selection: Use high-quality screw guns or impact drivers. For optimal performance, the recommended specifications are a minimum of 4 amps and an RPM range of 1800 to 2,500.
Note: When using impact drivers, take care not to overdrive screws during the seating stage, as this can lead to fastener thread or head failure, or strip out the work surface.
3.Proper Seating: The screw head should be fully seated when it is flush with the work surface to ensure a secure connection.
4.Penetration Depth: The fastener should penetrate beyond the metal by a minimum of three thread pitches for a strong and reliable hold.
By adhering to these guidelines, you can ensure effective installation and optimal performance of Screworks fasteners.
1.Metal-to-Metal Fastening: Perfect for securing strap bracing and connectors.
2.Panel Connections: Serves as an additional screw in panel connections when more than two screws are recommended by the software.
3.Wall Connectors: Ideal for attaching connectors to walls, featuring a super flat 1mm head that prevents cladding and lining from cracking during installation.
ScreworksTM products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. ScreworksTM and all other trademarks are registered trademarks of Stratus Steel Pvt. Ltd.
Ground Godown No.8, Omkar
Warehousing, Phursungi, Pune,
Maharashtra, 412308
Copyright © 2025 Screworks™ Stratus Steel Pvt. Ltd.
